XtraBond®9500SC - Hybrid Polyurethane Sealant
XtraBond® 9500SC is a high performance, one component, easy to apply surface coating. XtraBond® 9500SC is approved for moisture driven markets and the product has been specifically designed for the truck, trailer and container markets to assure a waterproof surface coat & patch.
Applications
- Truck and Trailer Roof Patch Applications
- Industrial Coating Applications
- Vertical & Horizontal Joint Surfaces
- Water Prevention in Container Use
- Roof Repair Applications
Features
- Approved for Moisture & Damp Conditions
- Fast Cure
- High Strength Bond
- Advance Formulation
- No Solvants
- No Shrinkage
- Odorless
Specifications
Exceeds the requirements of ASTM C 920, Type S, Grade NS, Class 25, Use NT, M, G and A
• Federal Specification TT-S-00230C, Type II, Class A
• CAN/CGSB-19 13-M87
• AAMA 808.3-92 Exterior Perimeter Sealing.
Technical Specs
| Skin Time | Less than 30 minutes @ 77 deg F/ 50% RH |
| Tack Free Time | Less than 1 hour @ 77 deg F / 50% RH |
| Cure Rate | 1/8” Bead per 24 Hrs |
| VOC | 10 g/L (0.0751 lb/gal) |
| Elongation @ Break | 150% |
| Hardness (shore A) | 40 +- 5 |
| Adhesion-n-Peel | 36 pli |
| UV Rating | No discoloration or change in appearance after 2000 hours of UV |
| Lap Shear | 210 psi |
| Tensile Strength | 175 psi |
| Staining | None |
| Low Temp. Flexibility | Retained to -75 F degrees |
| High Temp. Flexibility | Up to 400 F for short periods |
| Sag | Self-leveling |
Compliant with the following national, state and district VOC regulations:
US Environmental Protection Agency
California Air Resources Board SCM Districts
South Coast Air Quality Management District
Maricopa County, AZ
Northeast Ozone Transport Commission
Colors
This product is available in the following colors:
- Aluminum Stone
- Special colors upon request
Industries
The XB9500SC is available for the following industries
Packaging
This product is available in the following configurations:
- 1 gallon containers
- 5 gallon pails
- 55 gallon drums
Limited Lifetime Warranty
This product is guaranteed to give satisfactory performance if applied in accordance with the label directions. Liability to Premier Industrial Supply, Inc. (Premier) is limited to a full refund of the purchase price or product replacement if product is proven defective. Premier shall not be liable for loss or damage, whether direct, consequential or incidental. There are no other warranties expressed or implied including the implied warranty of merchantability or fitness for a particular purpose.
